| Titre : | Preparation and Characterization of Dy3+- Doped Glasses in the Sb2O3–B 2O3–Na2O Glass System |
| Auteurs : | Halima MEHAMDIA, Directeur de thèse ; Mohamed Toufik Soltani , Auteur |
| Type de document : | Mémoire magistere |
| Editeur : | Biskra [Algérie] : Faculté des Sciences Exactes et des Sciences de la Nature et de la Vie, Université Mohamed Khider, 2026 |
| Format : | 1 vol.(P87) / ill.couv.ill.en coul / 24cm |
| Langues: | Anglais |
| Mots-clés: | Boron oxide glass, Heavy metal oxide glass, Optical properties, Thermal properties, Dy3+ ions |
| Résumé : |
This study aims to prepare a ternary heavy metal oxide glass doped with 0.5% dysprosium oxide (Dy2O3), while investigating the effect of varying the boron oxide (B2O3) to antimony oxide (Sb2O3) ratio. The samples were prepared using an experimental technique based on thermal melting of the components, followed by rapid quenching, and then annealing and polishing processes to ensure sample homogeneity and structural stability. The study included the analysis of the thermal and optical properties of the glass samples using several techniques, most notably differential scanning calorimetry (DSC) for glass transition analysis, ultraviolet–visible (UV–VIS) spectroscopy, and photoluminescence spectroscopy. The results showed that increasing the boron oxide (B2O3) content leads to enhanced optical transparency due to reduced absorption, along with noticeable spectral effects in both absorption and light emission. It was also found that doping with 0.5% dysprosium oxide (Dy2O3) achieves a balance between the glass transparency and its spectral efficiency, making the prepared material suitable for advanced optical applications. Based on these results, this type of glass doped with 0.5% dysprosium oxide (Dy2O3) can be directed toward advanced technological applications such as lasers, light-emitting diodes (LEDs) and optical pumping systems. |
| Sommaire : |
Table of Contents: ....................... I List of Figures:.......................... IV List of Tables: .......................... VI General Introduction: .................... 1 Chapter One:Glasses and applications: Overview I-1-Introduction: ........................ 4 I-2- Historical Overview of Glass: ......................... 4 I-3-States of Matter: ......................................5 I-3-1-Crystalline solids: .................................. 5 I-3-2-Amorphous solids: ................................... 5 I-4-Glass definition: ..................................... 6 I-5- Glass Preparation: .................................... 6 I-6-Glassy state: .......................................... 7 I -7-Glass structure: ...................................... 8 I -7-1-Simple structure: ................................... 8 I-7-2-Composite glass structure: ........................... 9 I-8-Types of glass: ........................................ 10 I-9-Properties of glass: ................................... 12 I-9-1-Optical properties: .................................. 12 I-9-2-Thermal properties: .................................. 13 I-9-3-Mechanical properties: ............................... 15 I-9-4-Chemical properties: ................................. 15 I-10-Antimony oxide: ....................................... 16 I-10-1-History of Antimony oxide(Sb2O3): ................... 16 I-10-2-Properties of Antimony oxide: ....................... 16 I-10-3-Applications of Antimony oxide: ..................... 18 I-10-4-Structure of Antimony oxide: ........................ 18 I-11-Rare earthelements: ................................... 20 I-12- Dysprosium Dy+3: ..................................... 21 I-12-1-History of Dysprosium Dy+3 : ........................ 21 I-12-2- Properties of dysprosium Dy+3: ..................... 23 I-13- conclusion: .......................................... 24 Chapter Two:Glass preparationandcharacterization II-1-Introduction: ......................................... 30 II-2-Experimental work: .................................... 30 II-2-1-Raw materials: ...................................... 30 II-2-2- Equipment and Tools Used for Sample Preparation: ............... 32 II-2-3-Chemical composition ratios of the samples: ..................... 35 II-2-4-Selection of crucibles: ......................................... 35 II -2-5-Glass preparation: ............................................. 35 II-3-Methods and techniques used in characterization: .................. 38 II-3-1-Thermal properties: ............................................. 38 II -3-1-1-Thermal analysis by differential scanning calorimetry (DSC): .............. 38 II-3-1-2- Principle of operation of a DSC instrument: ........................ 39 II-3-2-Optical properties: ............................................... 40 II-3-2-1- Ultraviolet-Visible spectroscopy (UV-VIS): ............. 40 II-3-2-2-Principle of operation of a UV–Visible (UV–Vis) spectrophotometer: ..................... 41 II-3-3- Photoluminescence study: ........... 42 II-3-3-1- Theory: ....................... 43 II-3-3-2-Spectrophotometer device: ..............44 II-4- Optical amplification(Laser): ................... 44 II-4-1- Laser device components: ...................... 44 II-5-conclusion: ...................................... 46 Chapter Three:Results and discussions III-1- Introduction: ............................ 48 III-2-Experimental study: .............................. 48 III-2-1-Materials used in glass preparation: ..................... 48 III-2-2- Composition of the studied samples: ..................... 48 III-2-3-Glass preparation: ....................................... 49 III-3-Results and Discussion: .................................... 49 III-3-1-Thermal properties: ...................................... 49 III-3-1-1-Differential scanning calorimetry (DSC): ............... 49 III-3-2-Optical properties: ...................................... 51 III-3-2-1-Ultraviolet–visible spectroscopy: ...................... 51 III-3-3-Structural properties: ................................... 54 III-3-3-1- Spectrophotometer: .................................... 54 III-3-3-2- Light spectrumcolor: .................................. 65 III-conclusion: .................................................. 69 General conclusion: .............................................. 72 |
Disponibilité (1)
| Cote | Support | Localisation | Statut |
|---|---|---|---|
| MPHY/684 | Mémoire master | bibliothèque sciences exactes | Consultable |




