| Titre : | Investigating the effect of (Al, Cu) co-doing on the physical characteristics of ZnO thin films prepared by spray pyrolysis |
| Auteurs : | Aya BELKACEMI, Auteur ; Kheira Bennaceur, Directeur de thèse |
| Type de document : | Mémoire magistere |
| Editeur : | Biskra [Algérie] : Faculté des Sciences Exactes et des Sciences de la Nature et de la Vie, Université Mohamed Khider, 2026 |
| Format : | 1 vol.(P67) |
| Langues: | Anglais |
| Mots-clés: | ZnO thin films, Cu–Al co-doping, Pneumatic spray pyrolysis, Optoelectronic properties. |
| Résumé : |
The present work explores the synthesis and physical properties of Al/Cu co-doped ZnO thin films grown at 400°C using pneumatic spray pyrolysis. The study discusses the various properties of four samples prepared by varying the Cu concentration (0%, 1%, 3%, and 5%) while keeping the aluminum doping concentration constant at 1 wt.%. A comprehensive characterization suite was utilized to assess the deposited layers. Structural and morphological features were probed through X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Meanwhile, UV-visible spectroscopy and the fourpoint probe technique were applied to extract the optical and electrical parameters. The results revealed that increasing the Cu concentration influenced the film properties. Optimal optoelectronic behavior was achieved at a 1 wt.% copper doping level (the A1CZO sample), while higher concentrations led to structural and morphological degradation. This sample exhibited the highest crystalline quality and excellent optical clarity, transmitting approximately 92% of incident light. Furthermore, it recorded an energy gap of 3.27 eV and achieved a peak figure of merit of 9.036 × 10⁻7 Ω⁻¹. |
| Sommaire : |
General Introduction.................…1
References....................................3 CHAPTER I: General Background on Zinc Oxide Thin Films Introduction...................................................4 I.1. An Overview of Transparent Conducting Oxides (TCOs)...............................................…4 I.1.1. definition....................................4 I.1.2. Properties of Transparent Conducting Oxides (TCOs)......................4 I.1.2.1. Optical Properties of TCOs.................4 I.1.2.2. Electrical properties........................................…5 I.1.3. Criteria for Choosing TCOs..............5 I.2. Zinc oxide.....................................................6 I.2.1. Zinc Oxide Properties....................7 I.2.1.1. Structural Properties………………………………………………………………7 I.2.1.2. Electrical Properties....................9 I.2.1.3. Optical properties...............................10 I.2.1.4. Electronic Properties and Energy Band Configuration…....….…................................11 I.2.2. Doping processes in ZnO.......................12 I.2.3. Co-Doped Zinc Oxide (Zn.......................................14 I.2.3.1. Overview of co-doped ZnO........................................................14 I.2.4. Technological Uses of Zinc Oxide.................16 References.............20 CHAPTER II: Preparation procedures and characterization methodologies for thin films II.1. Thin Film Deposition Techniques..........25 II.2. Selection criteria for a deposition method......................26 II.3. Overview of the Spray Pyrolysis Process..........................26 ⅠⅠ.3.1. Theoretical Models for Spray Pyrolysis Film Growth….........................27 II.4. Characterization methods...................... 30 II.4.1. Structural characterization.. ..............30 II.4.1.1. X-ray diffraction (XRD)…………...………..........................…..……………….......30 II.4.1.2. Lattice Parameters……………….……...............…..………………………..……31 II.4.1.3. Determination of strain (ε)……..……………………………….................………32 II.4.1.4. Determination of Stress (σ)…..................................................................................32 II.4.1.5.Crystallite size..……..…………………………………………….…………...…..33 II.4.2. Optical characterization…...…………...………….……..................................…....…34 II.4.2.1. UV-Visible Spectrophotometry………...............................................……..…...34 II.4.2.2. Transmittance…………………………………...................................................35 II.4.2.3. Band Gap Determination………...................………………………………..….35 II.4.2.4. Urbach energy Determination...............................................................................36 II.4.2.5. Refractive index……….………......................................…………..............…...38 II.4.3. Electrical Characterization...……………………………………………….....….....…39 II.4.3.1. Four-point probe Method………….....................................................……..…....39 II.4.3.2. Electrical Resistivity Measurement……………………………………….……..39 II.4.4. Determination of thin film thickness………………………………………………….40 II.4.5. Figure of merit………………………………………………………………………...40 ⅠⅠ.4.6. Morphological Characterization………………………………………………….….....41 ⅠⅠ.4.6.1. Scanning Electron Microscopy (SEM)………………………...………….……….41 References……………………..………………..…........................................................…….43 CHAPTER III: Experimental Results and Discussion III.1. Experimental method…………………………………………….….………………….46 III.1.2. Preparation of Al and Cu co-doped ZnO Thin Films....……………………………46 III.1.2.1. Pre-Deposition Protocols…………...................................................................46 III.1.2.2. Preparation of solutions….........….………………………….……………..…47 III.1.2.3. Deposition of AZO, A1CZO, A3CZO, and A5CZO thin film...……...............48 III.1.2.3. Experimental Setup.........……………………………………………………....50 III.2. Results and discussions........…………………………………………………………….51 III.2.1. Structural Characterization via X-ray Diffraction (XRD).………………........…....51 III.2.1.1.Crystallite Size………………………………………………………….……...54 III.2.2. Surface Morphology Analysis.…..............................................................…..…….….55 III.2.3. Film Thickness………………………………………………………………………..56 III.2.4.Optical Analysis………………………………………...……..….…...........................57 III.2.4.1.Transmittance Spectra…………....................................…………………….…...57 III.2.4.2. Urbach Energy and Optical Band Gap..............................................................….58 III.2.3.Electrical Characteristics……………………………………………………….……...61 III.2.3.1.Resistivity…………………………………………………….……………...........61 References ………….……………..…………………………..………………….............…..63 General Conclusion…………………………………………………………………………...67 |
Disponibilité (1)
| Cote | Support | Localisation | Statut |
|---|---|---|---|
| MPHY/677 | Mémoire master | bibliothèque sciences exactes | Consultable |




